Skip to Content

Tile & Stone Adhesive

TFIX-F1

For fixing ceramic and clay tiles with higher porosity (greater than 3%) in interior dry spaces such as living rooms, bedrooms, and kitchens. 







  • Appearance - Grey Cementitious Powder

  • Ideal for - Glazed or Ceramic Body Tiles

  • Packing Size - 25 Kg bag


Standard Compliances


IS:15477:2019 - TYPE 1 

Meets Indian standards for basic cementitious tile adhesives, suitable for ceramic/clay tiles in dry interior areas.


EN 12004:2017 - C1T

Certified as a standard cementitious adhesive with:

  • C1: Normal adhesion strength
  • T: Slip resistance

Core Features

Ideal for Ceramic & Clay Tiles 

 Specially designed for reliable installation of ceramic and clay tiles on suitable surfaces.

Superior Bond Strength & Crack Resistance 

Withstands temperature variations and moisture exposure while ensuring a long-lasting, secure bond.  

Easy to Use

Ready-to-use formulation; just mix with water for hassle-free application.

Cost-Effective Solution

 Offers an economical alternative to traditional tile-fixing methods.

Steps to apply.



Technical Data Sheet ​ ​ ​ ​ ​ ​       ​    Download     

Frequently asked questions

TFix-F1 is designed for ceramic and clay tiles with an apparent porosity greater than 3%.​ It can also be used for small vitrified tiles on floors, but it is not recommended for low-porosity vitrified, glass, mosaic or dense natural stones.

TFix-F1 is recommended for interior dry areas such as living rooms, bedrooms, corridors, and retail spaces. For wet areas like bathrooms, kitchens, or submerged conditions, we recommend Fixup TFix-F2 Tile Adhesive.

It can be applied to cement plaster, screed, and concrete substrates. Ensure the surface is clean, dry, and level before application.

Simply mix the adhesive powder with clean water as per the manufacturer’s instructions. No extra cement or sand should be added, as this weakens performance.

On average, 3–4 kg/m², depending on tile size, substrate condition, and notched trowel used.

Yes, Fixup TFix-F1 complies with IS:15477:2019 and EN 12004:2017 (C1T) standards for bond strength and slip resistance.

No. Adding cement or sand damages the adhesive’s chemistry and reduces bonding power. Always use as supplied.

TFix-F1 provides an open time of ~20 minutes, and the initial setting time period is approximately 24 hours, depending on site conditions.

Unlike cement mortar, Fixup TFix-F1 offers better adhesion, smoother spreading, reduced wastage, and long-term durability, ensuring fewer callbacks and repairs.

#buildingBHARAT