SAFEGUARD 247
Fixup® SAFEGUARD 247 is a high-performance, single-component elastomeric coating designed to provide superior heat resistance and damp-proof protection for construction applications.
Formulated with advanced polymer technology, it withstands high temperatures while preventing water ingress, making it ideal for residential and commercial surfaces.
- Appearance - White Liquid
- Ideal for - Waterproofing and heat-proofing of external and internal concrete surfaces
- Packing Size - 5 L, 20 L
Core Features
Excellent Waterproofing Properties
Forms a continuous, seamless barrier that prevents water ingress through walls, floors, and roofs. Breathable Coating
Allows controlled release of trapped moisture vapour from the substrate without compromising waterproofing.
Crack-Bridging Ability
Flexible formulation that accommodates minor substrate movements and prevents cracks from allowing water seepage.
High Bond Strength
Adheres strongly to concrete, brick, masonry, and plaster surfaces.
Easy Application
It can be applied with brush, roller, or spray, depending on the site requirement.
Comfort & Energy Efficiency
Maintains drier, cooler interiors by reducing heat absorption and moisture retention in walls.
How to use
• Ensure surfaces are clean, dry, and free from dust, grease, and loose particles. Repair cracks and joints before application.
• Stir well before use. Do not dilute unless specified.
• Apply using a brush or roller in two or more coats with a drying time of 6-8 hours between coats.
• Allow a minimum of 24 hours for full curing before exposing to water.
• Absorbent surfaces may require more material.
Technical Data Sheet Download
Frequently asked questions
Dampproof coating is a protective layer applied to building surfaces to resist moisture absorption and limit dampness, especially for walls and floors exposed to humidity but not constant water pressure.
Dampproofing offers resistance to moisture but does not block water under pressure. Waterproofing is designed for severe exposure—like bathrooms, terraces, and rooftops—where persistent water ingress is a concern.
These coatings are suitable for concrete, brick, masonry, plaster, and cement surfaces in basements, external and internal walls, and floors prone to dampness.
Usually, two coats are recommended to provide optimal protection. Always follow specific product instructions for best results.
They protect against condensation and minor moisture intrusion but are not effective for rising damp.
A well-applied damp-proof coating helps prevent efflorescence and salt movement by keeping moisture out of wall surfaces.
Modern dampproof coatings are non-toxic and low in volatile organic compounds (VOC), but adequate ventilation is recommended during application.
Most products dry within an hour and fully cure in 24–48 hours. Check your product instructions for details.
Ensure surfaces are clean, dust-free, and moist.